Catrachos por el mundo

A First-Timer's Guide To Using A Sex Doll Properly And Safely
So you've purchased your first doll, or you're just about to. Either way, there's a brief spell of slight panic as you unbox a 35 kg silicone human, end up standing in the middle of the living space, and ask yourself: now what? That question is precisely what this guide answers. No padding and no assumption that you have any idea what you're doing, just the hands-on things you will genuinely need in the initial week plus the things that will spare you from costly errors in month one. Reading it again after she arrives will make considerably more sense than the first, so go through it once beforehand and once afterwards, when you'll catch things you skipped over the first time.
 
You will would like to do a few things before you even open the package, as shifting her about becomes much harder once she's out of it. Decide exactly where she's going to live, and "somewhere in the bedroom" does not count, so pick an actual area like a cabinet, a corner, or a carry case. The last thing you wish is to be improvising storage at 11 at night with a bare doll in your arms, seeing as dolls are hefty and unwieldy. Dye transfer is a genuine risk, so prepare the space she'll rest on, which could be a bed, floor, or storage box, and be sure it is clean and free of dark blankets, poorly dyed fabrics, and anything else that might shed colour. Carpet needs something smooth under her. Any low bed can droop under her pressure in time, so be sure it will not.
 
Get everything you need ready before she arrives:
1. Cornstarch or baby powder (for TPE dolls)
2. A hair dryer (for softening joints)
3. A spotless, light-toned cloth (for the cloth test)
4. A coarse-toothed wig comb (not a normal hairbrush)
5. Drying stands (for the orifice areas)
6. Mineral oil made for TPE (where it applies)
7. A soft powder brush (for powdering)
 
None of this breaks the bank, but all of it counts. Maybe about £20 pays for the full kit, and it is the distinction between a doll that stays in top condition and one that doesn't. Do not rip the package open: open it with maintenance, and if it is damaged, picture it before you open it, as that is your sole protection for a warranty case. When it is open, carry out a quick inspection: verify for rips in the armpits and groin, check that all fingers are in one piece, and verify the head sculpt matches what you bought. Picture any concern straight away and get in contact with the vendor before you do anything else, because a claim gets significantly harder once the doll has been used or repositioned.
 
The aspect that takes practically every new buyer off guard comes next: she will feel inflexible. Out of the factory, the joints are tight, which is perfectly standard and does not mean anything is damaged. The joints need easing before you can pose her, and the technique is straightforward. Soften the TPE at each joint with a blow-dryer on a gentle setting, not hot, after that softly move each joint through its whole range of motion, working through the neck, shoulders, elbows, wrists, hips, knees, and ankles. Do not force anything, and if a joint will not move, warm it up certain more. Spend an entire hour on this. It sounds excessive, but it's the variation among a doll you will genuinely pose and a doll that ends up locked in one pose as you gave up.
 
She's heavier than she looks, which surprises everyone. A 35 kg doll doesn't sound especially weighty up to the point you lift her from a low position and the pressure is concentrated in the wrong places, so use proper lifting technique, squatting down and lifting with your legs as opposed to your back. Keep her close to your body by grabbing under the armpits and hugging her when you can, seeing as the closer she is to your centre of balance, the less pressure you will feel. She's also warmer than you anticipate, seeing as TPE and silicone both hold warmth pretty well, and the first time you feel her with care she'll feel less plastic than you were probably expecting. The main reason people say their dolls feel alive isn't movement or AI, it is that the cloth really responds to touch in a manner that takes you by surprise.
 
You will need to powder her often, since TPE gets clammy in time, especially in hot weather or after cleansing, and a light layer of cornstarch or baby powder applied with a soft cosmetic brush holds the finish even and dust-free, so do this at the end of every cleaning session. Occasional oiling is also needed, as TPE sheds oil in time, and a tiny amount of mineral oil formulated especially for TPE dolls every couple of months holds the cloth soft and prevents cracks, although too much oil makes the skin slippery and gathers dust faster than dried-out skin does, so do not go overboard.
 
Believe of cleansing as a regime, not a one-off. After use:
1. Remove any inserts and wash them separately
2. Wash the orifice areas using warm water and mild detergent
3. Dry everything well with drying rods (15 to 20 minutes)
4. Dust the exterior with cornstarch or baby powder
5. Put away her with care
 
Do not treat this as optional, as if you skip it you will get mould forming inside her in as little as a few weeks. At close to 45 minutes the entire procedure takes longer than the majority of people expect, which is the primary reason long-term owners switch to removable liners, which cut that time approximately in half.
 
This is where new owners make the classic blunder, since they do not think about storage until it is a concern. Hanging is best, using a heavy-duty overhead hook rated for at least 60 kg with a dedicated loop, which holds her in one position without placing pressure on the joints, and this is the method most veteran owners use. You can put away her lying down as well, but be careful: level surfaces are fine and bumpy ones aren't, and long stretches on her back can press her buttocks or breasts flat, so change the position now and next. Keep her out of direct sunlight at all times, since UV damages both TPE and silicone and washes out wigs and coloured parts fast, which makes a wardrobe or a covered carry case ideal.
 
The internet has a lot of opinions about owning dolls, most of which are wrong or exaggerated. You shouldn't feel you have to be "careful" in the sense of walking on eggshells around her, since yes, she's weighty and she has joints that need maintenance, but she's also designed to be used and she's not made of glass. There's no need to be self-conscious: millions of folk own sex dolls, the industry has grown tremendously in the last ten years, and the social stigma has faded rapidly, so owning one is a private choice and not a moral failing.
 
Nor do you have to treat her like a person. Building detailed characters and personas for their dolls is element of the appeal for many owners, which is great, but you do not have to, and a doll for sexual satisfaction and companionship without the roleplay is an entirely valid way to use one. The hands-on side is the only thing you truly need to get right, as everything else is personal taste and nobody else gets to decide on how you use something you own.
 
My regime, for what that is worth, is basic, and every owner develops their own. Spend a couple of minutes freeing up the joints before each session to verify nothing is inflexible, as opposed to the whole hour from the first time, and powder at the end of every clean every time. Examine the dye test on any new outfits even if you've used the same brand before, keep a replacement wig ready as synthetic fabric takes longer to dry than you'd anticipate and you do not wish to be waiting, and keep her correctly every time. It is not fiddly, just the process that maintains your doll in great condition for a long time in place of months.
 
The opening month teaches you most of what you must know, and early missteps tend to be low-cost ones when you're careful. The pricey issues come later, and they practically always stem from something skipped in the early weeks. Consider of a joint limbered up too aggressively, a cloth tested on the doll as opposed to a cloth, or a storage arrangement that appeared fine until the load bedded into it. Slow down at the start and the rest takes maintenance of itself.
 
Something will eventually go wrong, so there's also the question of what to do when it does. A tear in the armpit, a loose joint, a dye mark that will not come out. The instinct is to panic and assume the doll is done for, but virtually everything short of a broken frame is fixable if you spot it early. Compact splits are handled by TPE patch kits, which cost virtually nothing. Tightening or replacing loose joints is possible. Marks are the one thing that does not come out, this is why the fabric test is so important. Learn where the fixable difficulties are and quit worrying about the ones that aren't.
 
A doll is a big purchase and it deserves respect, but "serious" does not mean "difficult." Limber up the joints, powder her routinely, keep her correctly, and you will get years out of her, but skip those things and you will be replacing her much sooner than you expected. Week one is the hardest aspect, and after that it becomes routine. More info at this Your Ultimate Word on Sex Dolls Right Now- What Nobody Tells You (http://team-uber.com/forum/viewtopic.php?f=3&t=1953) c739881  not to mention The Complete Breakdown of Sex Dolls Today- What Nobody Tells You (https://prepperforum.se/showthread.php?tid=109018) and A Quick Deep Dive Into Sex Dolls Today- No Hype Just Facts (https://forum.krystynajanda.pl/viewtopic.php?f=19&t=103917). Also check out  informative post (http://forum.anchorpointpodcast.com/viewtopic.php?t=386305) on top of  find out (http://team-uber.com/forum/viewtopic.php?f=3&t=1758) together with  content (http://crewride.com/forum/viewtopic.php?p=640381) as well as  index (https://cbfunk.ch/forum/viewtopic.php?t=1663) not to mention  pop over here (https://ulundi.online/mybb/showthread.php?tid=119) bearing in mind  my link (http://talknaija.com/viewtopic.php?t=300634) and don't forget  useful content (http://team-uber.com/forum/viewtopic.php?f=3&t=1670) on top of  their explanation (http://rc.zeitup.hera-software.de/thread-11086.html) bearing in mind  resource (https://www.futurforum.itisavogadro.org/bb/showthread.php?tid=926) and  article (https://www.blitzschmiede-mv.de/viewtopic.php?t=47709) for more.