Catrachos por el mundo

Sex Doll Feet Explained: Standing Feet Vs Non-Standing Feet
Few purchasers think about standing feet beforehand, yet the difference, once they need them, is gigantic. Don't let the spec sheet fool you; this small detail changes what you can do with the doll, how she stores, how she photographs, and how she wears over time. Get to grips with the difference before you order and you've taken one of the simplest steps towards steering clear of an annoying purchase.
 
Standing Upright Without Support
There's a simple basic difference. Standing feet have metal bolts embedded in the soles, which allow the doll to stand upright without support. These bolts are absent from non-standing feet, so the doll can only sit or lie down, and trying to stand her will damage the feet. Having the bolts or not is the key, and everything else follows from that.
 
A Wider Range of Poses and Settings
For photography and display, standing feet are essential. Full-length poses without visible supports, and display anywhere that requires her to be upright, such as a corner or doorway, are open to a doll that can stand unaided. The main reason most photographers specify standing feet when ordering is the wide range of poses and settings it opens up that non-standing feet rule out.
 
Why Showers Demand Standing Feet
Showering is another case where standing feet are essential. If you want to shower with your doll, she needs to be able to stand, because lying her down in a shower is both impractical and dangerous. The metal bolts ensure that the feet don't absorb water the way non-standing feet would, and the standing feet give her stability in a wet environment. This is a real safety consideration; water absorption in non-standing feet can lead to rust and eventual structural failure.
 
The Source of a Lot of Damaged Dolls
Shower use deserves more detail, being the source of a lot of damaged dolls. Inside the ankle of non-standing feet there's foam or filler material that absorbs water when it gets wet. The metal skeleton inside the leg is then rusted by the water, which takes weeks or months to become evident but is basically unfixable once it starts. Never put a doll with non-standing feet in the shower, nevertheless cautious you are, since the water will find its way in regardless of your precautions.
 
Space-Efficient Storage
Some setups make standing feet easier to store as well. With standing feet she can be stored upright in a corner, a wardrobe or a storage cabinet, without the need for a hanging hook or a storage case. Purchasers who want to display the doll rather than keep her hidden will find this a good alternative, and it's space-efficient if you don't have room for a hanging setup. Some buyers prefer the apparent, accessible storage that the standing feet make possible.
 
The Extra Cost Explained
Standing feet cost slightly more and weigh a little more, and that's the drawback. Metal bolts add a small quantity of weight to the doll. Manufacturing is also more involved. The upshot is a price that's ordinarily a few percent higher than a doll with non-standing feet. If you're purchasing on an extremely tight budget, know that the difference is small and it's usually worth the additional cost.
 
Bolts Showing When the Feet Are Bare
The bolts can show if the feet are bare, which is the other downside. With high-heeled shoes or open-toed footwear, the bolts might be noticeable in photos, something some customers find distracting. This is a trivial aesthetic issue, and it can be solved by covering the feet with closed shoes or by opting for footwear that conceals the bolts, so it's not a reason to avoid standing feet totally.
 
Fine for Bed-Only Dolls
If you only want to use the doll in bed and don't plan to display her standing or shower with her, non-standing feet are fine, and cheaper and lighter too. A doll that lives chiefly in a bed or on a sofa gets by perfectly well on non-standing feet, with the savings available for upgrades like articulated hands or a better wig. This is a completely valid choice for customers who know what they want.
 
Comfortable to Touch
Some buyers find non-standing feet more comfortable to touch, being marginally softer and more pliable. You won't ordinarily opt for on this alone, as it's a subtle difference, but it's worth knowing about if you're specifically looking for maximum softness. On non-standing dolls the feet feel more like the rest of the doll, not like they have a hard core inside them.
 
Tearing and Collapse
Forgetting what kind of feet they have, purchasers try to stand the doll in any case, and that's the large risk with non-standing feet. It's a common error with genuine outcomes, since the foam inside the ankle can't support the doll's weight and will tear or collapse. The result is a doll that can no longer stand even if you try to support her, because the feet have been permanently damaged. If you're purchasing non-standing feet, remember that they're non-standing, and don't be tempted to test their limits.
 
Cutting Into the Feet Is Expensive and Risky
One more question: can a doll that doesn't have standing feet be fitted with them afterwards? Not easily; that's the short answer. New hardware has to be installed by cutting into the feet if you add the bolts after that, and it's costly and regularly doesn't work as well as the original, since the bolts are embedded in the soles during manufacturing. It's better to acquire a doll with standing feet in the first place than to try to add them later if you're considering acquiring a doll without standing feet and think you might want them later.
 
Which Feet Should You Order?
Selecting between standing and non-standing feet? The functional advice is simple. Should you plan to photograph the doll, display her standing, or use her in the shower, standing feet are what you need. For use only in bed or on a sofa, with no care about display, non-standing feet are perfectly enough. Undecided purchasers are safer with standing feet, which restrict nothing and justify their small extra cost.
 
Lying Down Storage Needs More Space
There's a gender consideration as well that's worth mentioning. Because they're heavier and more tricky to store in any other way, male dolls typically advantage from standing feet more than female dolls. Storage lying down, which puts pressure on the body and needs more space, is the only alternative for a 45kg male doll that can't stand. Male dolls can store upright with standing feet, which is a real benefit for purchasers who don't have a lot of room.
 
Barefoot Photography Priorities
Standing and non-standing feet differ aesthetically, which is worth a final note. Evident when the doll is barefoot can be the small hardness at the bottom of standing feet, which the bolts cause. Less aesthetically pleasing, to some customers, is this, particularly on dolls with delicate features, as the hard soles look somewhat industrial. Some buyers prefer the softer, more natural look of non-standing feet. This is a trade-off that only matters if you're photographing the doll barefoot, and it's worth factoring into your decision if barefoot photos are a priority.
 
Bolt Care for Standing Feet
Another angle worth considering is maintenance. Periodic checks keep standing feet safe, given that a loose bolt can damage the foot or the ankle and a bolt falling out completely can cause the doll to collapse. A gentle twist of the bolts every few months checks them; if they feel loose, tighten them with the suitable tool. With no hardware to come loose, non-standing feet avoid this issue and are a little lower-maintenance in the long run.
 
Grip and Stability
Standing on distinct surfaces is also influenced by the bolts. Carpet is where the bolts grip well and the doll is steady. On silky hard flooring in particular, the bolts can slip, and the doll may need extra support to stay upright. To stop sliding on a hard surface, consider a small mat or a grippy pad beneath the feet. Standing feet on a hard floor is the case to know about here, since non-standing feet don't have this issue, the doll not standing in the first place.
 
Bolts Add a Little Length to the Foot
A final, frequently overlooked, consideration is the effect of standing feet on the doll's overall proportions. The bolts add a small quantity of length to the foot, which can a little change the way the doll looks in barefoot photos. Planning to photograph the doll barefoot and caring about specific proportions? This subtle effect, generally invisible in shoes, is worth knowing about. Non-standing feet lack the bolts and consequently this effect, leaving the feet a little shorter and more natural-looking.
 
The Better Choice for Everyone Else
Most buyers should find standing feet worth the extra cost; they open up posing, display, storage, and shower options that non-standing feet don't. That's the bottom line. Certain the doll will only ever be used in bed, and never displayed or photographed standing? Then skip them. Nobody else should. For the rest of customers, standing feet are the better choice, and rank among the simplest upgrades to justify. More info at this rosslink. Also check out  my blog (https://zivotkostelecnadlabem.cz/viewtopic.php?t=1322) which is worth considering with  webpage (https://kollaboratsia.com.ua/index.php?topic=299.new) and  that site (https://www.fiorinofunclub.com/showthread.php?tid=7391) for more.