Catrachos por el mundo

Standing Feet Vs Non-Standing Feet Explained: Pros, Cons And Picks
You won't think about standing feet until you need them, and then you'll find the difference is vast. A small detail on the spec sheet, sure, but it changes how the doll stores, photographs and wears over time, as well as what you can do with her. If you comprehend the difference before you order, you've stayed away from a frustrating purchase in one of the simplest ways there is.
 
Attempting to Stand Her Will Damage the Feet
There's a simple basic difference. Standing feet have metal bolts embedded in the soles, which permit the doll to stand upright without support. Sitting or lying down is all a doll with non-standing feet can do, as they don't have these bolts, and trying to stand her will damage the feet. Whether the bolts are present decides everything else; they're the key.
 
Why Photographers Specify Standing Feet
Photography and display both require standing feet. Anywhere that needs her to be upright, including a corner or a doorway, can display a doll that can stand unaided, and she can be photographed in full-length poses without apparent supports. This opens up a wide range of poses and settings that aren't possible with non-standing feet, and it's the main reason most photographers specify standing feet when ordering.
 
Water Absorption Leads to Rust
For shower use too, standing feet are essential. For showering with your doll, standing ability is a requirement; lying her down in a shower is both impractical and dangerous. The metal bolts make sure that the feet don't absorb water the way non-standing feet would, and the standing feet give her stability in a wet environment. It's a genuine safety consideration since water absorption in non-standing feet can lead to rust and eventual structural failure.
 
Foam or Filler Inside the Ankle
Worth expanding is the shower use point, as it's the source of a lot of damaged dolls. Non-standing feet include foam or filler material inside the ankle, and wet conditions make that material absorb water. Once it starts, the rusting of the metal skeleton inside the leg by the water is fundamentally unfixable, though it takes weeks or months to become noticeable. Because the water will find its way in irrespective of your precautions, a doll with non-standing feet should never be in the shower, no matter how cautious you are.
 
Display Rather Than Hide
Another benefit of standing feet is easier storage in some setups. Without needing a hanging hook or a storage case, a doll with standing feet can be stored upright in a corner, a wardrobe or a storage cabinet. Space-efficient, this suits customers who don't have room for a hanging setup, and it's good for purchasers who want to display the doll rather than keep her hidden. The doll can be stored in a way that's noticeable and accessible thanks to the standing feet, and some customers prefer this.
 
Weight and Price Trade-Offs
The disadvantage of standing feet is that they're a little more pricey and slightly heavier. You'll usually pay a few percent more than for non-standing feet, because the metal bolts add a small quantity of weight and manufacturing is more involved. Normally worth the extra cost, and small, the difference is still worth knowing about on a really tight budget.
 
Selecting Footwear That Conceals Them
If the feet are bare, the bolts can become evident; that's the other disadvantage. Some customers find it distracting that the bolts might be evident in photos on a doll with high-heeled shoes or open-toed footwear. This is a slight aesthetic issue, and it can be solved by covering the feet with closed shoes or by selecting footwear that conceals the bolts, so it's not a reason to steer clear of standing feet completely.
 
Savings for Articulated Hands or a Better Wig
Fine for purchasers who only want to use the doll in bed and don't plan to display her standing or shower with her, non-standing feet are also cheaper and lighter. Save on the feet, spend on articulated hands or a better wig; non-standing feet are perfectly enough when the doll will mainly be in a bed or on a sofa. It's a completely valid choice if you know what you want.
 
A Subtle Difference
There's a small softness and flexibility to non-standing feet that some buyers find more comfortable to touch. The difference is subtle and not typically enough to justify the choice on its own, but it's worth knowing about if you're specifically looking for maximum softness. Non-standing dolls have feet that feel more like the rest of the doll and less like they have a hard core inside them.
 
Trying to Stand the Doll Anyway
The large risk with non-standing feet: customers forget what kind of feet they have and attempt to stand the doll anyway. Real damage comes of this widespread mistake, as the foam inside the ankle can't take the doll's weight and will tear or collapse. You end up with a doll that can no longer stand even with your support, since the feet have been permanently damaged. Remember that non-standing feet are non-standing, if you're acquiring them, and don't be tempted to test their limits.
 
Can Standing Feet Be Retrofitted?
There's also the question of whether standing feet can be retrofitted to a doll that doesn't have them. In short, no, not easily. The bolts are embedded in the soles during manufacturing, and adding them subsequently requires cutting into the feet and installing new hardware, which is pricey and frequently doesn't work as well as the original. It's better to purchase a doll with standing feet in the first place than to attempt to add them later if you're considering acquiring a doll without standing feet and think you might want them later.
 
Standing Feet Don't Limit What You Can Do
If you're selecting between standing and non-standing feet, the practical advice is uncomplicated. You need standing feet if you plan to photograph the doll, display her standing, or use her in the shower. If display doesn't matter and you only want to use her in bed or on a sofa, non-standing feet are perfectly acceptable. If you're not sure, standing feet are the safer option, because they don't limit what you can do with the doll and they're worth the small extra cost.
 
Upright Storage for Male Dolls
There's also a gender consideration worth mentioning. Because male dolls are heavier and more hard to store in any other way, they usually get more from standing feet than female dolls do. There's no alternative but to store a 45kg male doll that can't stand lying down, which puts pressure on the body and needs more space. A genuine upside for purchasers who don't have a lot of room is that standing feet give male dolls the ability to store upright.
 
The Aesthetic Difference
A final note is worth making on the aesthetic difference between standing and non-standing feet. The bolts make standing feet a little harder at the bottom, and this can be noticeable when the doll is barefoot. Dolls with delicate features particularly suffer, some purchasers feel, because the hard soles look marginally industrial and less aesthetically gratifying. Softer and more natural-looking, non-standing feet are preferred by some buyers. A trade-off that matters only when photographing the doll barefoot, this is worth factoring into your decision if barefoot photos are a priority.
 
A Bolt That Falls Out Can Make the Doll Collapse
Maintenance is another angle that's worth considering. Periodic checks keep standing feet safe, given that a loose bolt can damage the foot or the ankle and a bolt falling out entirely can cause the doll to collapse. Check the bolts every few months by gently twisting them, and if they feel loose, tighten them with the suitable tool. The issue doesn't arise with non-standing feet, which have no hardware to come loose, making them slightly lower-maintenance in the long run.
 
Carpet Grips Well
How the doll stands on different surfaces is also influenced by the bolts. Grip is good on carpet, and the doll is stable. The doll may need additional support to stay upright when the bolts slip on hard flooring, particularly a silky floor. On hard surfaces, a small mat or a grippy pad under the feet is worth considering to avoid sliding. Non-standing feet don't have this issue, because the doll isn't standing in the first place, but if you're planning to display a doll with standing feet on a hard floor, this is worth knowing about.
 
An Overlooked Detail: Proportions
One final consideration, regularly overlooked, is how standing feet impact the doll's overall proportions. Adding a small quantity of length to the foot, the bolts can slightly change the way the doll looks in barefoot photos. You probably won't see it in shoes, as this is a subtle effect, but it's worth knowing about if you plan to photograph the doll barefoot and care about specific proportions. Non-standing feet lack the bolts and thus this effect, leaving the feet marginally shorter and more natural-looking.
 
Final Verdict on Feet
Alternatives for posing, display, storage and the shower are opened up by standing feet, which non-standing feet can't match, making them worth the additional cost for most buyers. You're safe to skip them only when you're certain the doll will only be used in bed and won't be displayed or photographed standing. Standing feet are better for everyone else, and they're among the simplest upgrades to justify. More info at this rosslink. Also check out  a knockout post (http://forum.exalto-emirates.com/viewtopic.php?f=7&t=245207) bearing in mind  he has a good point (https://cbfunk.ch/forum/viewtopic.php?t=764) alongside all  pop over to this website (http://enterprise-nt.ca/forum/viewtopic.php?t=69396) alongside all  recommended you read (https://gbill.ru/forums/topic/796/an-honest-look-at-sex-dolls-today-no-hype-just-facts/view/post_id/800) bearing in mind  have a look here (https://kollaboratsia.com.ua/index.php?topic=153.new) together with  more tips here (http://talknaija.com/viewtopic.php?t=299711) together with  next page (https://kollaboratsia.com.ua/index.php?topic=177.new) which is worth considering with  click (https://www.registrofiatbarchetta.com/viewtopic.php?f=1&t=2112035) and don't forget  visit this page (http://enterprise-nt.ca/forum/viewtopic.php?t=69430) and  click over here now (https://www.antiradary-forum.cz/viewtopic.php?p=30217) for more.