Catrachos por el mundo

Standing Feet Vs Non-Standing Feet: What The Difference Means
Standing feet go unconsidered until they're needed, at which point customers discover the difference is gigantic. Small detail on the spec sheet, big results: what the doll can do, how she stores, how she photographs and how she wears over time all change. Avoiding an annoying purchase is uncomplicated enough if you comprehend the difference before you order.
 
The Bolts Are the Key
There's an uncomplicated basic difference. Standing upright without support is possible because standing feet have metal bolts embedded in the soles. Non-standing feet lack these bolts, meaning the doll can only sit or lie down, with damage to the feet if you attempt to stand her. Everything else follows from whether the bolts are present or not, because the bolts are the key.
 
The Photographer's Choice
Photography and display both require standing feet. Photographed in full-length poses without apparent supports, and displayed in a corner, a doorway or anywhere else that needs her upright: that's what a doll that can stand unaided can do. It opens up a wide range of poses and settings that aren't possible with non-standing feet, which is why most photographers specify standing feet when ordering.
 
Metal Bolts Keep Water Out of the Feet
Shower use is another thing for which standing feet are crucial. If you want to shower with your doll, she needs to be able to stand, because lying her down in a shower is both impractical and dangerous. A wet environment is no issue for stability with standing feet, and the metal bolts ensure the feet don't absorb water the way non-standing feet would. Rust and eventual structural failure can follow from water absorption in non-standing feet, which makes this a real safety consideration.
 
The Source of a Lot of Damaged Dolls
Expanding on the shower use point is worthwhile; it's the source of a lot of damaged dolls. With non-standing feet, the foam or filler material inside the ankle soaks up water when it gets wet. After that, water rusts the metal skeleton inside the leg; you won't see it for weeks or months, and it's fundamentally unfixable once it starts. A doll with non-standing feet should never be in the shower, no matter how careful you are, because the water will find its way in anyway of your precautions.
 
Visible and Accessible Storage
There's also easier storage with standing feet in some setups. A doll with standing feet can be stored upright in a corner, a wardrobe, or a storage cabinet without needing a hanging hook or a storage case. Without room for a hanging setup, this is a space-efficient alternative, and for anyone who wants to display the doll rather than keep her hidden it's a good one. Visible and accessible storage is made possible by the standing feet, which some buyers prefer.
 
A Few Percent More Expensive
On the drawback, standing feet are a little more costly and somewhat heavier. The metal bolts add a small amount of weight to the doll, and the manufacturing process is more involved, so the cost is generally a few percent higher than a doll with non-standing feet. The difference is small, typically worth the additional cost, and worth knowing about if you're buying on a really tight budget.
 
High Heels and Open-Toed Footwear
A further downside is the bolts becoming evident if the feet are bare. The bolts might be visible in photos on a doll with high-heeled shoes or open-toed footwear, and some purchasers find that distracting. Because this slight aesthetic issue can be solved by covering the feet with closed shoes or selecting footwear that conceals the bolts, it's not a reason to avoid standing feet totally.
 
Fine for Bed-Only Dolls
Customers who only want to use the doll in bed, and don't plan to display her standing or shower with her, will find non-standing feet fine, as well as cheaper and lighter. Where most of her life will be spent in a bed or on a sofa, non-standing feet are perfectly sufficient and leave money for upgrades like articulated hands or a better wig. For customers who know what they want, this is an entirely valid choice.
 
A Subtle Difference
Non-standing feet are also marginally softer and more flexible, which some customers find more comfortable to touch. This is a subtle difference, and it's not typically enough to justify the choice on its own, but it's worth knowing about if you're specifically looking for maximum softness. A hard core inside isn't what you feel in the feet on non-standing dolls; they feel more like the rest of the doll.
 
Don't Test the Limits
Forgetting what kind of feet they have, customers attempt to stand the doll in any case, and that's the sizable risk with non-standing feet. Genuine damage comes of this widespread oversight, as the foam inside the ankle can't take the doll's weight and will tear or collapse. Permanently damaged feet are the cause of a doll that can no longer stand even if you attempt to support her. Don't be tempted to test their limits if you're acquiring non-standing feet; remember that they're non-standing.
 
Can Standing Feet Be Retrofitted?
One more question: can a doll that doesn't have standing feet be fitted with them later? To put it briefly, not readily, no. Manufacturing is when the bolts get embedded in the soles; after that, you'd have to cut into the feet and install new hardware, which is pricey and regularly doesn't work as well as the original. Considering a doll without standing feet, and think you might want them later? Buy a doll with standing feet in the first place; it's better than trying to add them later.
 
Which Feet Should You Order?
For buyers who are selecting between standing and non-standing feet, the practical advice is simple. Standing feet are needed if you plan to photograph the doll, display her standing, or use her in the shower. Non-standing feet will do perfectly well if you only want to use her in bed or on a sofa and don't care about display. Unsure which to select? The small extra cost of standing feet buys you the safer choice, with no limit on what the doll can do.
 
Room for Storage Is a Real Concern
One more thing worth mentioning: a gender consideration. Male dolls are heavier and harder to store in any other way, so they generally advantage from standing feet more than female dolls. A 45kg male doll who can't stand must be stored lying down, putting pressure on the body and requiring more space. Standing feet give male dolls the ability to store upright, which is a genuine benefit for buyers who don't have a lot of room.
 
Industrial-Looking Soles on Delicate Dolls
The aesthetic difference between standing and non-standing feet is worth a final note. When the doll is barefoot, the slight hardness at the bottom of standing feet, caused by the bolts, can be visible. The hard soles look somewhat industrial, so some customers find this less aesthetically satisfying, particularly on dolls with delicate features. Softer and more natural-looking, non-standing feet are preferred by some purchasers. For barefoot photos as a priority, factor this trade-off into your decision; otherwise, it only matters if you're photographing the doll barefoot.
 
Maintenance: Check the Bolts Periodically
A maintenance angle is also worth considering. Periodic checks keep standing feet safe, given that a loose bolt can damage the foot or the ankle and a bolt falling out entirely can cause the doll to collapse. Check every few months, by gently twisting the bolts, and tighten with the appropriate tool whichever feel loose. There's no hardware to come loose with non-standing feet, so they don't have this issue and are somewhat lower-maintenance in the long run.
 
Grip and Stability
How well the doll stands on different surfaces depends in part on the bolts. Carpet suits the bolts, which grip well, leaving the doll stable. Particularly if the floor is smooth, the bolts can slip on hard flooring, and the doll may need additional support to stay upright. Consider a small mat or a grippy pad beneath her feet if the surface is hard; it stops sliding. Standing feet on a hard floor is the case to know about here, since non-standing feet don't have this issue, the doll not standing in the first place.
 
Generally Invisible in Shoes
There's a final consideration that's frequently overlooked, which is how standing feet impact the doll's overall proportions. The bolts add a small quantity of length to the foot, which can slightly change the way the doll looks in barefoot photos. Usually invisible in shoes, this subtle effect is worth knowing about if you're planning to photograph the doll barefoot and you care about precise proportions. Because they don't have the bolts, non-standing feet don't have this effect, and so are somewhat shorter and more natural-looking.
 
The Better Choice for Everyone Else
The bottom line is that most buyers get their money's worth from standing feet, because they open up posing, display, storage and shower options that non-standing feet don't. Who can skip them? Purchasers who are certain the doll will only be used in bed and won't be displayed or photographed standing. Standing feet are the better choice for everyone else, and one of the simplest upgrades to justify. More info at this rosslink. Also check out  linked here (https://cbfunk.ch/forum/viewtopic.php?t=1112) which is worth considering with  find this (https://pari-ot-internet.com/viewtopic.php?t=5453) and  view (https://pari-ot-internet.com/viewtopic.php?t=5529) for more.