Catrachos por el mundo

Standing Feet Or Non-Standing Feet? The Differences Explained
Purchasers seldom think about standing feet before they need them, and once they do, the difference turns out to be immense. Small on the spec sheet, it still changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. To steer clear of an irritating purchase, understand the difference before you order; it's one of the simplest ways.
 
Why Non-Standing Dolls Can Only Sit or Lie Down
It's a simple difference, at its most basic. Without support, a doll with standing feet can stand upright, thanks to the metal bolts embedded in the soles. Because non-standing feet don't have these bolts, the doll can only sit or lie down; trying to stand her damages the feet. Everything else flows from the bolts, which are the key, and whether they're present or not.
 
Essential for Photography and Display
Standing feet are a must for photography and display. Anywhere that requires her to be upright, including a corner or a doorway, can display a doll that can stand unaided, and she can be photographed in full-length poses without visible supports. It opens up a wide range of poses and settings that aren't possible with non-standing feet, which is why most photographers specify standing feet when ordering.
 
Water Absorption Leads to Rust
Showering is another case where standing feet are important. Want to shower with your doll? She has to be able to stand, since lying her down in a shower is impractical and hazardous. Stability in a wet environment comes from the standing feet, and the metal bolts make sure that the feet don't absorb water the way non-standing feet would. It's a real safety consideration since water absorption in non-standing feet can lead to rust and eventual structural failure.
 
No Precaution Is Enough
Let's expand on shower use, because a lot of damaged dolls start there. Foam or filler material absorbs water when it gets wet, and non-standing feet have that material inside the ankle. Weeks or months pass before the rust the water causes in the metal skeleton inside the leg becomes visible, and it's essentially unfixable once it starts. Showers and non-standing feet don't mix, no matter how diligent you are, as the water will find its way in irrespective of your precautions.
 
Standing Feet Make Storage Easier
Some setups make standing feet easier to store as well. No hanging hook or storage case is needed to store a doll with standing feet upright in a corner, a wardrobe, or a storage cabinet. For purchasers who don't have room for a hanging setup this is space-efficient, and for those who want to display the doll rather than keep her hidden it's a good alternative. Some customers prefer that the standing feet make it possible to store the doll in a way that's apparent and accessible.
 
Incredibly Tight Budgets and Standing Feet
The downside of standing feet is that they're a little more pricey and a little heavier. A few percent additional on the cost is usual compared with a doll with non-standing feet, thanks to a small quantity of weight from the metal bolts and a more involved manufacturing process. Usually worth the additional cost, and small, the difference is still worth knowing about on a very tight budget.
 
Closed Shoes Hide the Bolts
Bare feet can make the bolts visible, which is the other downside. High-heeled shoes or open-toed footwear on a doll can leave the bolts apparent in photos, which some purchasers find distracting. Because this slight aesthetic issue can be solved by covering the feet with closed shoes or picking footwear that conceals the bolts, it's not a reason to avoid standing feet entirely.
 
Perfectly Adequate for Many Buyers
They're cheaper and lighter, and non-standing feet are fine for purchasers who only want to use the doll in bed and don't plan to display her standing or shower with her. For a doll who'll chiefly be on a bed or sofa, perfectly adequate non-standing feet free up cash for other upgrades, such as articulated hands or a better wig. A completely valid choice, this, for buyers who know what they want.
 
Softer, More Flexible Feet
Some buyers find non-standing feet more comfortable to touch, being marginally softer and more elastic. It's worth knowing about if you're specifically looking for maximum softness, though this is a subtle difference and not usually enough to justify the choice on its own. Feeling more like the rest of the doll, and less like they have a hard core inside them, are the feet on non-standing dolls.
 
The Big Risk With Non-Standing Feet
It's the forgetful purchaser who trips up on non-standing feet, attempting to stand the doll in any case; that's the huge risk. Genuine damage comes of this typical mistake, as the foam inside the ankle can't take the doll's weight and will tear or collapse. Permanently damaged feet are the cause of a doll that can no longer stand even if you attempt to support her. Non-standing feet should be remembered as non-standing, and their limits shouldn't be tested.
 
The Short Answer Is No
Also worth asking is whether standing feet can be retrofitted to a doll that lacks them. The short answer is that it can't readily be done. Adding the bolts afterwards requires cutting into the feet and installing new hardware, which is expensive and frequently doesn't work as well as the original, because they're embedded in the soles during manufacturing. Buy a doll with standing feet in the first place, rather than trying to add them later, if you're considering a doll without them and think you might want them later.
 
Picking Between Standing and Non-Standing Feet
If you're opting for between standing and non-standing feet, the sensible advice is simple. You'll need standing feet for photographing the doll, displaying her standing, or utilising her in the shower. Only want her in bed or on a sofa, and don't care about display? Non-standing feet are perfectly sufficient. The safer select when you're undecided is standing feet; they limit nothing, and the small extra cost is worth it.
 
Why Male Dolls Need Standing Feet More
There's also a gender consideration worth mentioning. Because male dolls are heavier and more hard to store in any other way, they broadly get more from standing feet than female dolls do. A 45kg male doll that can't stand is a doll that has to be stored lying down, which puts pressure on the body and requires more space. For customers who don't have a lot of room, standing feet give male dolls the ability to store upright, which is a real benefit.
 
Barefoot Photography Priorities
There's a final note to make on the aesthetic difference between standing and non-standing feet. With the doll barefoot, the somewhat harder bottom of standing feet, down to the bolts, can be evident. Less aesthetically satisfying, to some customers, is this, especially on dolls with delicate features, as the hard soles look marginally industrial. Softer and more natural-looking, non-standing feet are preferred by some purchasers. A trade-off that matters only when photographing the doll barefoot, this is worth factoring into your decision if barefoot photos are a priority.
 
Bolt Care for Standing Feet
A maintenance angle is also worth considering. Bolt security on standing feet needs checking from time to time; a loose one risks the foot or ankle, and a missing one risks the doll collapsing. Every few months, check the bolts by gently twisting them, and tighten them with the appropriate tool if they feel loose. Non-standing feet escape this issue because there's no hardware to come loose, which makes them slightly lower-maintenance long term.
 
Silky Floors Need Extra Support
The bolts affect how the doll stands on different surfaces as well. Grip is solid on carpet, and the doll is stable. The doll may need additional support to stay upright when the bolts slip on hard flooring, particularly a smooth floor. Consider a small mat or a grippy pad beneath her feet if the surface is hard; it avoids sliding. No issue with non-standing feet, as the doll isn't standing in the first place. Displaying a doll with standing feet on a hard floor is where it's worth knowing about.
 
Ordinarily Invisible in Shoes
There's one more consideration that's frequently overlooked: standing feet impact the doll's overall proportions. Bolts mean a small quantity of extra length in the foot, which can a little change how the doll looks in barefoot photos. This subtle effect, typically invisible in shoes, matters if you're planning to photograph the doll barefoot and you care about precise proportions. Without the bolts, non-standing feet don't have this effect, and the feet are slightly shorter and more natural-looking.
 
Who Should Skip Standing Feet
The bottom line is that most purchasers get their money's worth from standing feet, because they open up posing, display, storage and shower options that non-standing feet don't. Skipping them is for buyers certain that bed use is all the doll will get, with no standing display or photography. Everyone else is better off with standing feet, one of the simplest upgrades to justify. More info at this rosslink. Also check out  get the facts (https://california.chat/showthread.php?tid=429) which is worth considering with  blog here (https://gelsenkirchen1904.de/thread-1537.html) together with  blog (https://forum.krystynajanda.pl/viewtopic.php?f=19&t=103326) bearing in mind  read (https://dark0de.org/showthread.php?tid=625) which is worth considering with  find this (https://my-mobile.eu/viewtopic.php?t=11561) not to mention  click resources (https://forum.qui-gonline.com/viewtopic.php?t=22712) as well as  check my source (https://fitnessnationforum.com/viewtopic.php?t=1149) as well as  company website (https://gbill.ru/forums/topic/719/a-quick-lowdown-on-sex-dolls-today-what-nobody-tells-you/view/post_id/723) not forgetting sites such as  check my site (https://thesolowargamer.com/showthread.php?tid=7396) and  read what he said (https://test.virtualworldsitalia.com/index.php?topic=388.new) for more.