Catrachos por el mundo

How To Use A Sex Doll: A Beginner's Guide To Getting It Right
Perhaps you've just purchased your first doll, or maybe you're on the verge of doing so. In both cases, there's a brief spell of slight panic as you unbox a 35 kg silicone human, stand there in your living space, and wonder: now what? The answer to that question is this guide. Anticipate hands-on pointers only: what you will genuinely need in the initial week and what will spare you from costly blunders in the opening month, with zero filler and no assumption that you have done this before. A second read after she arrives makes much more sense than the first, so go through it once in advance and once afterwards, when you will catch things you skipped over the first time.
 
You will would like to do a handful of jobs before you so much as open the package, as shifting her about becomes considerably harder once she's out of it. Make a decision for where she's going to live: not "somewhere in the bedroom" but a specific area, which might be a wardrobe, a corner, or a storage container. The last thing you would like is to be making up storage at 11 p.m. with an unclothed doll in your arms, as dolls are weighty and unwieldy. Whether she'll rest on a bed, floor, or storage container, obvious the space and verify that it's clean and free of anything that could transfer dye, as dark-toned blankets, budget fabrics, and anything that might lose colour are risky. With carpet, lay something smooth underneath her. If you've got a low bed, be sure it isn't going to sink under her load in time.
 
Before she arrives, get your supplies ready:
1. Baby powder or cornstarch (for TPE dolls)
2. A blow-dryer (for softening joints)
3. A clean, pale cloth (for the fabric check)
4. A wide-toothed wig comb (not a standard hairbrush)
5. Drying supports (for the orifices)
6. Mineral oil made for TPE (if relevant)
7. A soft powder brush (for powdering)
 
None of this breaks the bank, but all of it counts. Maybe £20 pays for the whole kit, and it is the difference among a doll that stays in good condition and one that does not. Open the package with care as opposed to tearing into it, and if the package is damaged, picture it before you open it, since that is your only safeguard for a return claim. Inspect her quickly once the package is open: look for rips in the armpits and groin, be sure all fingers are in one piece, and verify the head sculpt matches the order you placed. Take pictures of any difficulty straight away and get in touch with the retailer before you do anything else, seeing as a claim gets significantly harder once the doll has been used or repositioned.
 
The element that catches virtually every new buyer by surprise comes next: she will feel inflexible. Tight joints are entirely regular straight from the factory and do not mean any part is broken. Before you can pose her, you will have to limber up the joints, and the technique is easy. Use a hair dryer on a low setting, not hot, to soften the TPE at every joint, after that slowly move each joint through its whole range of motion, working through the neck, shoulders, elbows, wrists, hips, knees, and ankles. Do not force anything, and if a joint will not move, warm it up certain more. Set aside a complete hour for this. It sounds excessive, but it is what separates a doll you will in fact pose from one that ends up stuck in a single position as you gave up.
 
She's heavier than she looks, and this surprises everyone. Till you're lifting her from a low position with the load concentrated in the wrong places, a 35kg doll does not seem that bulky, so use correct lifting technique, squatting down and lifting with your legs rather than your back. Hug her where possible, grabbing under the armpits and keeping her close to your body, as the closer she is to your centre of mass, the less pressure you will feel. TPE and silicone both hold body warmth fairly well, so she's warmer than you expect, and the first time you feel her sensibly she'll feel less plastic than you were probably expecting. People say their dolls feel alive mainly as the material truly yields to touch in a manner that takes you by surprise, not since of movement or AI.
 
You'll have to powder her often, since TPE gets sticky with time, especially in summer heat or after cleansing, and a thin layer of cornstarch or baby powder applied with a soft make-up brush holds the finish smooth and clean, so do this after each cleaning session. You also have to oil her periodically, as TPE sheds oil in time and needs replenishment, and a light coat of mineral oil made specifically for TPE dolls every couple of months maintains the material soft and prevents drying out, though do not use too much as too much oil makes the finish slippery and collects collect dust sooner than dried-out skin does.
 
Believe of cleansing as a process, not a one-off. After use:
1. Remove any inserts and wash them separately
2. Wash the orifice areas using warm water and mild detergent
3. Dry everything fully with drying rods (15 to 20 minutes)
4. Dust the exterior with cornstarch or baby powder
5. Store her the right way
 
Do not treat this as optional, as if you skip it you will get mould developing inside her in as little as a few weeks. The majority of people expect it to be quicker, but the complete process takes around 45 minutes, and that is the chief reason veteran owners switch to removable liners, which cut that time just about in half.
 
The costliest error beginners make is not thinking about storage until it is a difficulty. Most seasoned owners hang their dolls, using a heavy-duty hanging hook rated for at least 60 kg with a dedicated loop, which holds her in the same position without putting stress on the joints. You can keep her lying down as well, but take attention: even surfaces are fine and uneven ones aren't, and long stretches on her back can squash her buttocks or breasts, so change the position now and after that. Never leave her in bright sunlight, since UV damages both TPE and silicone and washes out wigs and tinted details fast, so a cupboard or a covered storage container is ideal.
 
There's no shortage of internet opinions about owning dolls, and most of them are mistaken or exaggerated. Yes, she's bulky and her joints need maintenance, but you shouldn't feel you have to be "careful" in the sense of treating her like porcelain, as she's designed to be used and she's not made of glass. Embarrassment isn't needed, as millions of folk own sex dolls, the industry has grown massively in the last ten years, and the shame has diminished fast, which makes owning one a personal decision and not something wrong with you.
 
Treating her like a person isn't a requirement either. Some owners build complex characters and characters for their dolls, which is great and element of the appeal for many people, but you do not have to, and if you just wish a doll for physical pleasure and companionship without the roleplay, that is a totally valid way to use one. The real-world side is the only thing you genuinely need to get right, as everything else is individual taste and no one else gets a say on how you use something you bought.
 
Each owner ends up with their own process, and mine, for what that's worth, is uncomplicated. Spend five minutes or so limbering up the joints prior to every session to verify nothing is inflexible, rather than the whole hour from the first time, and powder after each clean without exception. Verify the cloth try on any fresh clothing even if you've used the same brand before, keep a replacement wig within reach as synthetic material takes longer to dry off than you'd expect and you do not would like to be waiting, and keep her sensibly every time. Nothing here is fiddly, it's simply the procedure that maintains your doll in good condition for many years in place of months.
 
Your first month will teach you the majority of what you need to know, and the errors you make early tend to be minor ones when you're careful. The costly difficulties come later, and they nearly always stem from something skipped in the early weeks. A joint limbered up too aggressively, a cloth tested on the doll as opposed to a cloth, a storage method that appeared fine until the load pressed down into it. Slow down at the start and the rest takes attention of itself.
 
You will also need to know what to do when something eventually goes wrong, as it will. It could be a tear in the armpit, a loose joint, or a mark that will not come out. Your instinct will be to panic and assume the doll is ruined, but virtually everything short of a broken frame is fixable if you spot it early. TPE mending kits cost almost nothing and handle compact rips. Tightening or replacing loose joints is possible. Blemishes are the one thing that does not come out, this is why the fabric test counts for so much. Learn where the fixable difficulties are and stop stressing about the ones that aren't.
 
A doll is a big purchase that deserves proper handling, but "serious" does not mean "difficult." Free up the joints, powder her often, keep her sensibly, and you will get years out of her, but skip those things and you'll be replacing her much sooner than you expected. The initial week is the hardest, and after that it becomes routine. More info at this rosslink. Also check out  check here (https://cbfunk.ch/forum/viewtopic.php?t=1371) on top of  other (http://forum.exalto-emirates.com/viewtopic.php?f=7&t=245785) and  go to my blog (https://dreamstation.site/showthread.php?tid=5196) for more.