Catrachos por el mundo

A Beginner's Guide To Using A Sex Doll: What To Know Before You Start
Perhaps you've just purchased your first doll, or maybe you're about to. Nearly all new owners hit a bout of brief panic at some point: a 35 kg silicone human unboxed on the living space floor, and you standing there thinking now what? The answer to that question is this guide. Expect day-to-day tips only: what you will genuinely need in week one and what will spare you from costly errors in month one, with no fluff and no presumption that you already know. A second read after she arrives will make significantly more sense than the first, so read it once beforehand and once after, when you will catch things you skipped over the first time.
 
You will wish to do a handful of jobs before you so much as open the package, as shifting her about becomes considerably harder once she's out of it. Settle exactly where she's going to live, and "somewhere in the bedroom" doesn't count, so pick a specific spot like a cabinet, a corner, or a storage container. Dolls are hefty and difficult to manage, and you do not wish to be improvising storage at 11 at night with an unclothed doll in your arms. Prepare the space she'll rest on, which could be a bed, floor, or carry case, and inspect it is clean and free of anything that could transfer dye, since dark blankets, budget fabrics, and anything that might shed colour pose a risk. If you have carpet, lay something smooth under her. With a low bed, inspect it will not sag under her pressure with time.
 
Before she arrives, get your kit ready:
1. Cornflour or baby powder (for TPE dolls)
2. A blow-dryer (for freeing up joints)
3. A spotless, pale-coloured cloth (for the dye check)
4. A wide-toothed wig comb (not a regular hairbrush)
5. Drying rods (for the openings)
6. Mineral oil made for TPE (where relevant)
7. A soft powder brush (for powdering)
 
None of this is pricey, but all of it matters. Maybe £20 pays for the full kit, and it's the distinction between a doll that holds its condition and one that does not. Unpack the package with care as opposed to tearing into it, and if the box is damaged, picture it before you open it, since that is your only cover for a warranty case. A quick inspection comes next: examine for splits in the armpits and groin, be sure all fingers are in one piece, and inspect the head sculpt matches what you bought. Speak to the retailer before you do anything else if something's wrong, and snap it straight away, since a claim gets significantly harder once the doll has been used or repositioned.
 
Then comes the aspect that catches nearly every new buyer off guard: she will feel inflexible. The joints are tight from the factory, which is perfectly standard and does not mean any part is broken. You should ease the joints before you can pose her, and the technique is easy. Soften the TPE at every joint with a blow-dryer on a medium setting, not hot, next softly move each joint through its entire range of motion, working through the neck, shoulders, elbows, wrists, hips, knees, and ankles. Do not force anything, and if a joint will not move, warm it up some more. Give this a complete hour. It sounds excessive, but it is the distinction among a doll you will in fact pose and a doll that ends up locked in the same position as you gave up.
 
Everyone is caught out by how weighty she is compared with how she looks. 35 kg doesn't seem like much up to the point you lift her from a low position and the load is concentrated in the wrong places, so use correct lifting technique: squat down and lift with your legs as opposed to your back. When you can, hug her, holding under the armpits and keeping her close to your body, as the closer she is to your centre of balance, the less pressure you will feel. TPE and silicone both hold body warmth fairly well, so she's warmer than you anticipate, and the first time you feel her carefully she'll feel less plastic than you'd probably expected. The chief reason people call their dolls lifelike isn't movement or AI, it is that the material truly reacts when touched in a method that catches you off guard.
 
You should powder her on a regular basis, since TPE gets clammy in time, especially in warm conditions or after cleaning, and a light coating of cornstarch or baby powder applied with a soft makeup brush holds the finish smooth and free of dust, so do this following every cleansing session. TPE sheds oil with time and needs replenishment, so oil her periodically: a light coat of mineral oil made specifically for TPE dolls every three months or so holds the fabric soft and prevents drying out, but do not go overboard, as excess oil makes the exterior slippery and picks up attract dust faster than dry skin does.
 
Cleansing is a regime in place of a one-off. After use:
1. Pull out any inserts and wash them on their own
2. Clean the orifices using warm water and mild detergent
3. Dry everything well with drying stands (fifteen to twenty minutes)
4. Dust the exterior with cornstarch or baby powder
5. Put her away carefully
 
This component isn't optional: skip it and mould will be growing inside her in as little as a few weeks. The entire procedure takes just about 45 minutes, which is longer than the majority of people anticipate, and it is the biggest reason old hands switch to detachable inserts, which cut that time approximately in half.
 
The classic misstep novice owners make is not thinking about storage until it's a difficulty. The best method is hanging, with a heavy-duty hanging hook rated for at least 60 kg and a dedicated loop, which maintains her in a single position without placing pressure on the joints, and it is the one most long-term owners use. You can put away her lying down as well, but be careful: level surfaces are fine and rough ones aren't, and long stretches on her back can squash her buttocks or breasts, so change the position now and next. Never leave her in strong sunlight, since UV damages both TPE and silicone and bleaches wigs and coloured parts fast, so a cupboard or a covered storage box is ideal.
 
The internet has a lot of opinions about owning a doll, most of which are wrong or exaggerated. She's not made of glass, so there's no need to be "careful" in the sense of treating her like porcelain: yes, she's hefty and her joints need maintenance, but she's also designed to be used. Embarrassment isn't needed, as huge numbers of people own sex dolls, the sector has grown dramatically in the past decade, and the social stigma has faded rapidly, which makes owning one a private choice and not a flaw in character.
 
Treating her like a person isn't a requirement either. Plenty of owners build complex characters and characters for their dolls, which is great and element of the appeal for many people, but it is optional, and wanting a doll for sexual satisfaction and companionship without the roleplay is an entirely valid way to use one. The day-to-day side is the only thing you truly need to get right, as everything else is individual taste and nobody else gets to decide on how you use something you purchased.
 
Every owner develops their own procedure, and mine for whatever it's worth is basic. Spend a couple of minutes easing the joints prior to every session to be sure nothing is inflexible, as opposed to the entire hour from the first time, and powder at the end of every clean no matter what. Keep a replacement wig ready, as synthetic hair takes longer to dry than you'd expect and you do not would like to be waiting, run the dye try on any new clothing even if you've used the same brand before, and put away her correctly every time. Nothing here is complicated, it is simply the procedure that maintains your doll in great condition for a long time as opposed to months.
 
Your first month will teach you most of what you must know, and the slip-ups you make early tend to be cheap ones if you take care. The things that go wrong later are the costly ones, and they practically always originate in something skipped in the opening weeks. Consider of a joint eased too aggressively, a material tested on the doll as opposed to a cloth, or a storage arrangement that looked fine until the weight sunk into it. Slow down at the start and the rest takes maintenance of itself.
 
There's also the question of what to do when something does eventually go wrong, seeing as it will. It could be a tear in the armpit, a loose joint, or a stain that will not come out. The instinct is to panic and assume the doll is beyond saving, but virtually everything short of a snapped frame is fixable if you notice it early. Tiny splits are handled by TPE repair packs, which cost virtually nothing. You can tighten or replace loose joints. Dye marks are the one thing that does not come out, and that is why the cloth test makes such a difference. Work out where the fixable issues are and stop stressing about the ones that aren't.
 
Serious purchases deserve proper handling, and a doll is one, but "serious" does not mean "difficult." Skip easing the joints, regular powdering, and right storage and you will be replacing her considerably sooner than you expected, but do them and you will get years out of her. After a tough first week, it turns into routine. More info at this The Full Look at Modern Sex Dolls- The Honest Breakdown (https://anchen.com.ua/index.php?topic=3216.new#new) ff2b4ea  which is worth considering with A Brutally Honest Guide to Sex Dolls Today- The Honest Breakdown (https://foro.muvenezuela.org/showthread.php?tid=96810) and The Only Primer on Sex Dolls Today- What You Need to Know (https://punbb.skynettechnologies.us/viewtopic.php?pid=1351155#p1351155). Also check out  official website (http://forum.golf-club.org.ua/viewtopic.php?t=93595) as well as  continued (http://forum.dcm-works.net/viewtopic.php?t=12813) and  view (http://mobile.diskusia.katasternehnutelnosti.sk/viewtopic.php?f=3&t=83618) for more.