Catrachos por el mundo

Sex Doll Feet Explained: Standing Feet Vs Non-Standing Feet
Standing feet are the sort of feature people ignore until they need them; after that, they find the difference enormous. It's a small detail on the spec sheet that changes how she stores, how she photographs, how she wears over time, and what you can do with the doll. Understanding the difference before you order is one of the simplest ways to stay away from an annoying purchase.
 
What Makes a Foot a Standing Foot
Simple is the basic difference. Metal bolts embedded in the soles of standing feet permit the doll to stand upright without support. Non-standing feet don't have these bolts, which means the doll can only sit or lie down, and attempting to stand her will damage the feet. It all hinges on the bolts, with everything else following from whether they're present or not.
 
Corners, Doorways and Anywhere Upright
Standing feet are essential for photography and display. Photographed in full-length poses without evident supports, and displayed in a corner, a doorway or anywhere else that needs her upright: that's what a doll that can stand unaided can do. Non-standing feet can't match the wide range of poses and settings this opens up, and it's the primary reason most photographers specify standing feet when ordering.
 
Stability in a Wet Environment
If you want shower use, standing feet are vital as well. For showering with your doll, standing ability is a requirement; lying her down in a shower is both impractical and dangerous. Stability in a wet environment comes from the standing feet, and the metal bolts ensure that the feet don't absorb water the way non-standing feet would. This is a real safety consideration; water absorption in non-standing feet can lead to rust and eventual structural failure.
 
Never Shower a Non-Standing Doll
Expanding on the shower use point is worthwhile; it's the source of a lot of damaged dolls. The ankle of a non-standing foot contains foam or filler material, which absorbs water when it gets wet. Weeks or months pass before the rust the water causes in the metal skeleton inside the leg becomes evident, and it's basically unfixable once it starts. Anyway of your precautions, the water will find its way in, which is why a doll with non-standing feet should never be in the shower however cautious you are.
 
Display Rather Than Hide
In some setups, standing feet also make storage easier. Stored upright in a corner, a wardrobe or a storage cabinet, a doll with standing feet doesn't need a hanging hook or a storage case. Without room for a hanging setup, this is a space-efficient choice, and for anyone who wants to display the doll rather than keep her hidden it's a good one. Some customers prefer the apparent, accessible storage that the standing feet make possible.
 
Incredibly Tight Budgets and Standing Feet
The disadvantage of standing feet is that they're a little more pricey and a little heavier. Few percent higher is the typical price versus a doll with non-standing feet, with the metal bolts adding a small amount of weight and the manufacturing process being more involved. The difference is small, and it's typically worth the extra cost, but it's worth knowing about if you're buying on a really tight budget.
 
Distracting in Photos
The second downside is that bare feet can show the bolts. In photos, the bolts might show on a doll wearing high-heeled shoes or open-toed footwear, and some customers find this distracting. Avoiding standing feet totally over this would be unnecessary; it's a minor aesthetic issue that closed shoes, or footwear that conceals the bolts, will solve.
 
A Completely Valid Choice
Non-standing feet are cheaper, lighter, and perfectly fine if the doll will only be used in bed and not displayed standing or taken in the shower. Where most of her life will be spent in a bed or on a sofa, non-standing feet are perfectly enough and leave money for upgrades like articulated hands or a better wig. Completely valid is this choice for purchasers who know what they want.
 
Softer, More Flexible Feet
The softer, more flexible feel of non-standing feet, small as it is, is more comfortable to touch for some customers. The difference is subtle and not typically enough to justify the choice on its own, but it's worth knowing about if you're specifically looking for maximum softness. Non-standing dolls' feet feel like the rest of the doll more than like they have a hard core inside them.
 
Don't Test the Limits
With non-standing feet the large risk is buyers forgetting what kind of feet they have, then trying to stand the doll in any case. The foam inside the ankle will tear or collapse under the doll's weight, since it can't support it, so this common mistake causes genuine damage. You end up with a doll that can no longer stand even with your support, since the feet have been permanently damaged. When you purchase non-standing feet, remember what they are and don't be tempted to test their limits.
 
Bolts Are Embedded During Manufacturing
One more question: can a doll that doesn't have standing feet be fitted with them subsequently? To put it briefly, not readily, no. Because the bolts are embedded in the soles during manufacturing, adding them after that means cutting into the feet and installing new hardware, an expensive process that frequently doesn't work as well as the original. Trying to add standing feet later is worse than purchasing a doll with standing feet in the first place, so if you're considering a doll without them and might want them later, purchase them first.
 
Functional Advice by Use Case
The practical advice on picking between standing and non-standing feet is uncomplicated. Standing feet are needed if you plan to photograph the doll, display her standing, or use her in the shower. If it's only bed or sofa use you're after, and display is of no concern, non-standing feet are perfectly adequate. When in doubt, standing feet win, since they leave every choice open and cost only a little more.
 
Pressure on the Body When Lying Down
Worth mentioning, too, is a gender consideration. Standing feet advantage male dolls more than female dolls in general, as they're heavier and harder to store any other way. If a 45kg male doll can't stand, he has to be stored lying down, which puts pressure on the body and needs more space. It's a genuine advantage for purchasers who don't have a lot of room that standing feet let male dolls store upright.
 
Harder Soles Because of the Bolts
One final note: the aesthetic difference between standing and non-standing feet. The bolts make standing feet marginally harder at the bottom, and this can be noticeable when the doll is barefoot. Some buyers consider it less aesthetically pleasing, especially with fragile features, because of the somewhat industrial look of the hard soles. Some buyers prefer non-standing feet, which are softer and more natural-looking. For barefoot photos as a priority, factor this trade-off into your decision; otherwise, it only matters if you're photographing the doll barefoot.
 
No Hardware to Come Loose
There's a maintenance angle as well that's worth considering. Why check periodically? A loose bolt can damage the foot or the ankle, and if one falls out completely the doll can collapse. If the bolts feel loose when you gently twist them to check, which you should do every few months, tighten them with the fitting tool. With no hardware to come loose, non-standing feet steer clear of this issue and are marginally lower-maintenance in the long run.
 
Silky Floors Need Extra Support
The bolts have an effect, too, on how the doll stands on different surfaces. The bolts grip well on carpet, so the doll is steady. On silky hard flooring in particular, the bolts can slip, and the doll may need extra support to stay upright. To stop sliding on a hard surface, consider a small mat or a grippy pad beneath the feet. If you're planning to display a doll with standing feet on a hard floor, know this. Non-standing feet are exempt, as the doll isn't standing in the first place.
 
How Standing Feet Change the Look
The doll's overall proportions are impacted by standing feet, a final consideration that's often overlooked. Bolts mean a small quantity of extra length in the foot, which can somewhat change how the doll looks in barefoot photos. If you care about specific proportions and plan to photograph the doll barefoot, this subtle effect, typically invisible in shoes, is worth knowing about. Because they don't have the bolts, non-standing feet don't have this effect, and so are a little shorter and more natural-looking.
 
One of the Simplest Upgrades to Justify
Most customers should find standing feet worth the additional cost; they open up posing, display, storage, and shower alternatives that non-standing feet don't. That's the bottom line. Skip them if, and only if, you're certain the doll will only be used in bed and won't be displayed or photographed standing. Everyone else should pick standing feet, which are the better choice and one of the simplest upgrades to justify. More info at this rosslink. Also check out  source material here (https://www.fiorinofunclub.com/showthread.php?tid=7588) for more.