The Definitive Word on Sex Dolls Right Now- What Actually Matters

[FrankJScott]

CLICK FOR THE BEST SEX DOLL FEET GUIDE NOW

Standing Feet Vs Non-Standing Feet Explained: What To Pick And Why
Few buyers think about standing feet beforehand, yet the difference, once they need them, is enormous. Don't let the spec sheet fool you; this small detail changes what you can do with the doll, how she stores, how she photographs, and how she wears over time. One of the simplest ways to stay away from a frustrating purchase is to understand the difference before you order.
 
Everything Follows From the Bolts
The difference comes down to something uncomplicated. Standing upright without support is possible because standing feet have metal bolts embedded in the soles. Without these bolts, non-standing feet limit the doll to sitting or lying down, and trying to stand her will damage the feet. Everything else flows from the bolts, which are the key, and whether they're present or not.
 
The Photographer's Choice
It's standing feet that photography and display can't do without. If a doll can stand unaided, full-length poses without visible supports are possible, as is display in a corner, a doorway or anywhere else that requires her to be upright. Poses and settings aren't possible with non-standing feet in the wide range that standing feet open up, which is the primary reason most photographers specify standing feet when ordering.
 
A Real Safety Consideration
There's shower use as well, which makes standing feet essential. Lying her down in a shower is impractical and risky, so showering with your doll means she needs to stand. A wet environment is no issue for stability with standing feet, and the metal bolts make sure the feet don't absorb water the way non-standing feet would. Genuine safety is at stake, as water absorption in non-standing feet can lead to rust and eventual structural failure.
 
Water Rusts the Metal Skeleton
It's worth expanding on shower use, since it's the source of a lot of damaged dolls. Inside the ankle of non-standing feet there's foam or filler material that absorbs water when it gets wet. Rust follows as the water attacks the metal skeleton inside the leg; it takes weeks or months to become evident, but it's basically unfixable once it starts. Nevertheless cautious you are, keep a doll with non-standing feet out of the shower, because the water will find its way in anyway of your precautions.
 
Space-Efficient Storage
Another benefit of standing feet is easier storage in some setups. You can store a doll with standing feet upright in a corner, a wardrobe or a storage cabinet without a hanging hook or a storage case. This works as a space-efficient choice when there's no room for a hanging setup, and it's a solid choice if you want to display the doll rather than keep her hidden. The doll can be stored in a way that's visible and accessible thanks to the standing feet, and some purchasers prefer this.
 
Small Difference, Usually Worth It
Standing feet are marginally more pricey and somewhat heavier, which is their drawback. Why the premium? The metal bolts add a small quantity of weight to the doll, manufacturing is more involved, and the price usually ends up a few percent higher than a doll with non-standing feet. The difference is small, usually worth the additional cost, and worth knowing about if you're buying on a very tight budget.
 
Closed Shoes Hide the Bolts
If the feet are bare, the bolts can become evident; that's the other drawback. With high-heeled shoes or open-toed footwear, the bolts might be evident in photos, something some customers find distracting. Closed shoes or footwear that hides the bolts solve this trivial aesthetic issue, so it's not a reason to avoid standing feet entirely.
 
A Doll for the Bed or Sofa
If you only want to use the doll in bed and don't plan to display her standing or shower with her, non-standing feet are fine, and cheaper and lighter too. Save on the feet, spend on articulated hands or a better wig; non-standing feet are perfectly sufficient when the doll will mainly be in a bed or on a sofa. Buyers who know what they want can make this choice entirely validly.
 
Softness as a Selling Point
Comfort to the touch is another point: non-standing feet are a little softer and more pliable, which some purchasers prefer. A subtle difference, not ordinarily enough to justify the choice on its own, this is still worth knowing about if you're specifically looking for maximum softness. Non-standing dolls' feet feel like the rest of the doll more than like they have a hard core inside them.
 
A Doll That Can No Longer Stand
The huge risk? Customers forget what kind of feet they have and try to stand the doll in any case. This is a typical slip-up, and it causes real damage, because the foam inside the ankle can't support the doll's weight and will tear or collapse. The result: the feet are permanently damaged, and the doll can no longer stand even if you try to support her. You're buying non-standing feet? Remember it, and don't be tempted to test their limits.
 
Decide Before You Order
Also worth asking is whether standing feet can be retrofitted to a doll that lacks them. Not readily; that's the short answer. During manufacturing the bolts are embedded in the soles; doing it afterwards means cutting into the feet and installing new hardware, which is costly and regularly doesn't work as well as the original. Considering a doll without standing feet, and think you might want them later? Purchase a doll with standing feet in the first place; it's better than attempting to add them later.
 
Standing Feet Don't Limit What You Can Do
When opting for between standing and non-standing feet, the useful advice is uncomplicated. If you plan to photograph the doll, display her standing, or use her in the shower, you need standing feet. Don't care about display and only want to use her in bed or on a sofa? Non-standing feet are perfectly sufficient. If you're on the fence, go with standing feet, the safer choice, because nothing is ruled out and the small additional cost is worth paying.
 
A Gender Consideration
Worth mentioning, too, is a gender consideration. More than female dolls, male dolls generally upside from standing feet, being heavier and more tricky to store in any other way. Pressure on the body and more space are needed when a 45kg male doll that can't stand has to be stored lying down. A real upside for purchasers who don't have a lot of room is that standing feet give male dolls the ability to store upright.
 
The Aesthetic Difference
A last word on the aesthetic difference between standing and non-standing feet is worthwhile. Standing feet are marginally harder at the bottom, because of the bolts, and this can be noticeable when the doll is barefoot. Some customers consider it less aesthetically satisfying, notably with delicate features, because of the somewhat industrial look of the hard soles. Softer and more natural-looking, non-standing feet are preferred by some customers. Barefoot photos being a priority makes this trade-off worth factoring into your decision, since it only matters if you're photographing the doll barefoot.
 
Check Every Few Months by Gently Twisting
It's worth considering the maintenance angle as well. Every few months, bolts on standing feet want a once-over, because one that works loose can damage the foot or ankle, and one that drops out altogether can bring the doll down. Gently twist the bolts every few months to check them, and if they feel loose, tighten them with the suitable tool. Non-standing feet don't have this issue, because there's no hardware to come loose, which makes them slightly lower-maintenance in the long run.
 
Standing Feet and Flooring
How the doll stands on different surfaces is also influenced by the bolts. Carpet suits the bolts, which grip well, leaving the doll constant. Especially if the floor is smooth, the bolts can slip on hard flooring, and the doll may need extra support to stay upright. Hard surface under the feet? Consider a small mat or a grippy pad to prevent sliding. It only concerns standing feet: non-standing feet don't have the issue because the doll isn't standing in the first place, but displaying one on a hard floor makes it worth knowing about.
 
More Natural-Looking Without the Bolts
A final consideration is regularly overlooked: how standing feet affect the doll's overall proportions. Adding a small quantity of length to the foot, the bolts can somewhat change the way the doll looks in barefoot photos. It's a subtle effect that's typically invisible in shoes, yet worth knowing about for barefoot photography when you care about exact proportions. With non-standing feet there are no bolts, so no such effect, and the feet are slightly shorter and more natural-looking.
 
Extra Cost for Extra Options
What it comes down to is that most buyers will find standing feet worth the extra cost, since they open up posing, display, storage, and shower alternatives that non-standing feet don't. Skipping them is for customers certain that bed use is all the doll will get, with no standing display or photography. For all other customers, standing feet are the better choice and among the simplest upgrades to justify. More info at this rosslink. Also check out his response for more.

CHECK OUT THE BEST SEX DOLL GUIDE ONLINE