A Straight-Up Look at Sex Dolls- Start Here

[FrankJScott]

CLICK FOR BEST SEX DOLL FEET ADVICE TODAY

Standing Feet Or Non-Standing Feet? The Differences Explained
You won't think about standing feet until you need them, and then you'll find the difference is vast. What you can do with her, how she stores, how she photographs and how she wears over time: a small spec sheet detail changes all of it. Get to grips with the difference before you order and you've taken one of the simplest steps towards avoiding a frustrating purchase.
 
The Difference Explained Simply
There's a straightforward basic difference. What lets the doll stand upright without support is the metal bolts embedded in the soles of standing feet. Sitting or lying down is all a doll with non-standing feet can do, as they don't have these bolts, and trying to stand her will damage the feet. It all hinges on the bolts, with everything else following from whether they're present or not.
 
Full-Length Poses Without Visible Supports
It's standing feet that photography and display can't do without. A doll that can stand unaided can be photographed in full-length poses without evident supports, and can be displayed in a corner, a doorway, or anywhere else that requires her to be upright. Most photographers specify standing feet when ordering for this main reason: it opens up a wide range of poses and settings that aren't possible with non-standing feet.
 
Why Showers Demand Standing Feet
In the shower, too, standing feet are necessary. Showering with your doll needs her to stand; the alternative, lying her down in a shower, is both impractical and hazardous. Her stability in a wet environment is down to the standing feet, and the metal bolts keep the feet from absorbing water the way non-standing feet would. This is a genuine safety consideration, because water absorption in non-standing feet can lead to rust and eventual structural failure.
 
Water Will Find Its Way In
A lot of damaged dolls come from shower use, so the point is worth expanding. Non-standing feet have foam or filler material inside the ankle, and that material absorbs water when it gets wet. From there the water rusts the metal skeleton inside the leg, taking weeks or months to become evident and being essentially unfixable once it starts. Never put a doll with non-standing feet in the shower, nevertheless careful you are, since the water will find its way in regardless of your precautions.
 
Storing Her Standing Up
Another advantage of standing feet is easier storage in some setups. You can store a doll with standing feet upright in a corner, a wardrobe or a storage cabinet without a hanging hook or a storage case. Display rather than hiding her away is something this suits well, and it's space-efficient for purchasers who don't have room for a hanging setup. The standing feet make it possible to store the doll in a way that's apparent and accessible, which some buyers prefer.
 
Metal Bolts Add Weight
The disadvantage of standing feet is that they're slightly more pricey and a little heavier. Price-wise, a doll with standing feet is typically a few percent higher than one with non-standing feet; the metal bolts add a small amount of weight and manufacturing is more involved. The difference is small, and it's usually worth the extra cost, but it's worth knowing about if you're purchasing on an incredibly tight budget.
 
Bolts in Photos
There's another downside: the bolts can become evident if the feet are bare. Photos of a doll in high-heeled shoes or open-toed footwear might show the bolts, which some purchasers find distracting. Closed shoes or footwear that hides the bolts solve this minor aesthetic issue, so it's not a reason to stay away from standing feet completely.
 
Know What You Want
Non-standing feet are cheaper, lighter, and perfectly fine if the doll will only be used in bed and not displayed standing or taken in the shower. Save on the feet, spend on articulated hands or a better wig; non-standing feet are perfectly adequate when the doll will mostly be in a bed or on a sofa. Entirely valid is this choice for customers who know what they want.
 
Maximum Softness
Some buyers find non-standing feet more comfortable to touch, being slightly softer and more pliable. Specifically looking for maximum softness? Then this subtle difference, though not ordinarily enough to justify the choice on its own, is worth knowing about. Less like they have a hard core inside them and more like the rest of the doll is how the feet on non-standing dolls feel.
 
Don't Test the Limits
The large risk with non-standing feet is that customers forget what kind of feet they have and attempt to stand the doll in any case. Tear or collapse is what the foam inside the ankle does under the doll's weight, which is why this usual error causes real damage. What results is a doll that can't stand any more even with support, as the feet have been permanently damaged. Resist the temptation to test the limits of non-standing feet, and remember that they're non-standing, if you're buying them.
 
Why Retrofitting Doesn't Work Well
A further question is whether a doll that doesn't have standing feet can have them retrofitted. Short answer: no, not readily. Embedded in the soles during manufacturing, the bolts can only be added afterwards by cutting into the feet and installing new hardware, which is expensive and frequently doesn't work as well as the original. Thinking of acquiring a doll without standing feet, but might want them later? Better to acquire a doll with standing feet in the first place than to try to add them later.
 
Photography, Display or Shower: You Need Standing Feet
Picking between standing and non-standing feet? The sensible advice is straightforward. If you plan to photograph the doll, display her standing, or use her in the shower, you need standing feet. If you only want to use her in bed or on a sofa, and you don't care about display, non-standing feet are perfectly enough. The safer pick when you're undecided is standing feet; they limit nothing, and the small additional cost is worth it.
 
Weight and Storage Together
It's worth mentioning a gender consideration too. Male dolls normally advantage from standing feet more than female dolls, because they're heavier and more difficult to store in any other way. Lying down storage is a must for a 45kg male doll that can't stand, and it puts pressure on the body and needs more space. With standing feet, male dolls can be stored upright, a real benefit for purchasers who don't have a lot of room.
 
Weighing Looks Against Function
One final note: the aesthetic difference between standing and non-standing feet. With the doll barefoot, the marginally harder bottom of standing feet, down to the bolts, can be noticeable. The hard soles look slightly industrial, so some buyers find this less aesthetically satisfying, particularly on dolls with fragile features. The softer and more natural look of non-standing feet is what some customers prefer. It's worth factoring into your decision if barefoot photos are a priority, as this trade-off only matters if you're photographing the doll barefoot.
 
A Quick Routine Check
A maintenance angle is also worth considering. Secure bolts matter: loose ones can damage the foot or the ankle, a bolt that falls out can cause a collapse, and so standing feet need periodic checking. Check every few months, by gently twisting the bolts, and tighten with the appropriate tool whichever feel loose. No hardware means nothing to come loose, so non-standing feet don't have this issue and are marginally lower-maintenance in the long run.
 
A Small Mat or Grippy Pad
Another effect of the bolts is on how the doll stands on different surfaces. Grip is good on carpet, and the doll is stable. The doll may need extra support to stay upright when the bolts slip on hard flooring, especially a silky floor. Sliding is avoided on a hard surface by a small mat or a grippy pad under the feet, which you should consider. Standing feet on a hard floor is the case to know about here, since non-standing feet don't have this issue, the doll not standing in the first place.
 
More Natural-Looking Without the Bolts
Regularly overlooked, there's a final consideration in how standing feet influence the doll's overall proportions. The way the doll looks in barefoot photos can a little change, as the bolts add a small quantity of length to the foot. It's worth knowing about if you're planning to photograph the doll barefoot and you care about specific proportions, though this is a subtle effect and normally invisible in shoes. No bolts means no such effect with non-standing feet, whose feet are marginally shorter and more natural-looking.
 
What Standing Feet Open Up
The bottom line is that most buyers get their money's worth from standing feet, because they open up posing, display, storage and shower options that non-standing feet don't. Nobody should skip them unless they're certain the doll will only be used in bed and won't be displayed or photographed standing. Anyone else should go for standing feet, the better choice and one of the simplest upgrades to justify. More info at this rosslink. Also check out find out here now for more.

CHECK OUT THE BEST SEX DOLL GUIDE ONLINE