A Brutally Honest Overview of Sex Dolls- The Real Talk

[FrankJScott]

SEE BEST SEX DOLL FEET GUIDE NOW

Standing Feet Or Non-Standing Feet? The Differences Explained
You won't think about standing feet until you need them, and then you'll find the difference is enormous. The spec sheet gives it a line or less, but it changes what you can do with the doll, how she stores, how she photographs and how she wears over time. Understand the difference before ordering and you'll have avoided an annoying purchase in one of the simplest ways possible.
 
Standing Upright Without Support
The basic difference couldn't be simpler. Embedded in the soles of standing feet, metal bolts let the doll stand upright without support. If the feet are non-standing, there are no bolts, so the doll can only sit or lie down; stand her and you'll damage the feet. Everything else follows from whether the bolts are present or not, because the bolts are the key.
 
The Photographer's Choice
Standing feet are a must for photography and display. A doll that stands unaided can be photographed full-length with no noticeable supports, and displayed in a corner, a doorway, or anywhere else she needs to be upright. Non-standing feet can't match the wide range of poses and settings this opens up, and it's the principal reason most photographers specify standing feet when ordering.
 
A Real Safety Consideration
Also critical is standing feet for shower use. If you want to shower with your doll, she must be able to stand, since laying her down in a shower is impractical as well as unsafe. Her stability in a wet environment is down to the standing feet, and the metal bolts keep the feet from absorbing water the way non-standing feet would. Genuine safety is at stake, as water absorption in non-standing feet can lead to rust and eventual structural failure.
 
Water Will Find Its Way In
Shower use is the source of a lot of damaged dolls, which makes the point worth expanding. The ankle of a non-standing foot contains foam or filler material, which absorbs water when it gets wet. Fundamentally unfixable once it starts, the rust the water causes in the metal skeleton inside the leg takes weeks or months to become evident. Nevertheless attentive you are, keep a doll with non-standing feet out of the shower, because the water will find its way in irrespective of your precautions.
 
Display Rather Than Hide
There's also easier storage with standing feet in some setups. No hanging hook or storage case is needed to store a doll with standing feet upright in a corner, a wardrobe, or a storage cabinet. For purchasers who don't have room for a hanging setup this is space-efficient, and for those who want to display the doll rather than keep her hidden it's a decent choice. Some buyers prefer that the standing feet make it possible to store the doll in a way that's evident and accessible.
 
Is the Premium Worth Paying?
The price you pay for standing feet is that they're a little more pricey and slightly heavier. Price-wise, a doll with standing feet is usually a few percent higher than one with non-standing feet; the metal bolts add a small amount of weight and manufacturing is more involved. It's worth knowing about if you're acquiring on an extremely tight budget, though the difference is small and usually worth the extra cost.
 
Bolts Showing When the Feet Are Bare
Bare feet can make the bolts apparent, which is the other disadvantage. With high-heeled shoes or open-toed footwear, the bolts might be visible in photos, something some purchasers find distracting. You can solve this minor aesthetic issue by covering the feet with closed shoes or picking footwear that hides the bolts, so don't avoid standing feet completely because of it.
 
A Doll for the Bed or Sofa
They're cheaper and lighter, and non-standing feet are fine for purchasers who only want to use the doll in bed and don't plan to display her standing or shower with her. Save on the feet, spend on articulated hands or a better wig; non-standing feet are perfectly acceptable when the doll will mostly be in a bed or on a sofa. This choice is entirely valid for customers who know what they want.
 
The Tactile Side of Non-Standing Feet
Some buyers find non-standing feet more comfortable to touch, being slightly softer and more adaptable. The difference is subtle and not usually enough to justify the choice on its own, but it's worth knowing about if you're specifically looking for maximum softness. Feeling more like the rest of the doll, and less like they have a hard core inside them, are the feet on non-standing dolls.
 
A Doll That Can No Longer Stand
The large risk with non-standing feet: purchasers forget what kind of feet they have and attempt to stand the doll anyway. A widespread slip-up, and a damaging one: the doll's weight is too much for the foam inside the ankle, which will tear or collapse. You end up with a doll that can no longer stand even with your support, since the feet have been permanently damaged. Keep in mind that non-standing feet are non-standing, if that's what you're purchasing, and don't be tempted to test their limits.
 
Can Standing Feet Be Retrofitted?
Whether standing feet can be retrofitted to a doll that doesn't have them is another question. Short answer: no, not easily. Embedded in the soles during manufacturing, the bolts can only be added later by cutting into the feet and installing new hardware, which is expensive and frequently doesn't work as well as the original. You might want them later if you're considering purchasing a doll without standing feet; in that case, it's better to acquire a doll with standing feet in the first place than to attempt to add them later.
 
Choosing Between Standing and Non-Standing Feet
Deciding between standing and non-standing feet comes with uncomplicated sensible advice. If any of photographing the doll, displaying her standing, or employing her in the shower is on the cards, you need standing feet. For use only in bed or on a sofa, with no care about display, non-standing feet are perfectly adequate. If you're not sure, standing feet are the safer choice, because they don't limit what you can do with the doll and they're worth the small extra cost.
 
Room for Storage Is a Real Concern
A gender consideration is also worth mentioning. Male dolls are heavier and harder to store in any other way, so they generally upside from standing feet more than female dolls. Lying down storage is a must for a 45kg male doll that can't stand, and it puts pressure on the body and requires more space. Storing upright becomes possible for male dolls with standing feet, a real upside if you don't have a lot of room.
 
A Final Note on Appearance
Worth a final note is the aesthetic difference between standing and non-standing feet. The bottom of standing feet is a little harder because of the bolts, something that can be evident when the doll is barefoot. Some purchasers consider it less aesthetically gratifying, particularly with delicate features, because of the somewhat industrial look of the hard soles. Non-standing feet look softer and more natural, and some purchasers prefer that. A trade-off that matters only when photographing the doll barefoot, this is worth factoring into your decision if barefoot photos are a priority.
 
A Bolt That Falls Out Can Make the Doll Collapse
Another angle worth considering is maintenance. Every few months, bolts on standing feet want a once-over, because one that works loose can damage the foot or ankle, and one that drops out altogether can bring the doll down. By gently twisting the bolts every few months you can check them, and if they feel loose, use the suitable tool to tighten them. With no hardware to come loose, non-standing feet stay away from this issue and are marginally lower-maintenance in the long run.
 
Standing Feet and Flooring
The bolts influence how the doll stands on distinct surfaces as well. Carpet is where the bolts grip well and the doll is constant. Slipping bolts on hard flooring, particularly if the floor is smooth, can mean the doll needs additional support to stay upright. On hard surfaces, a small mat or a grippy pad under the feet is worth considering to prevent sliding. Non-standing feet don't have this issue, because the doll isn't standing in the first place, but if you're planning to display a doll with standing feet on a hard floor, this is worth knowing about.
 
An Overlooked Detail: Proportions
A final, regularly overlooked, consideration is the effect of standing feet on the doll's overall proportions. Because the bolts add a small amount of length to the foot, the doll can look slightly distinct in barefoot photos. It's a subtle effect that's usually invisible in shoes, yet worth knowing about for barefoot photography when you care about precise proportions. Without the bolts, non-standing feet don't have this effect, and the feet are somewhat shorter and more natural-looking.
 
Extra Cost for Extra Options
Posing, display, storage and shower alternatives that non-standing feet don't offer are opened up by standing feet, and the bottom line is that they're worth the extra cost for most buyers. The exception is the customer who's certain the doll will only be used in bed and won't be displayed or photographed standing. Standing feet are the better choice for everyone else, and one of the simplest upgrades to justify. More info at this rosslink. Also check out click for info not to mention home and why not look here for more.

CHECK OUT THE BEST SEX DOLL GUIDE ONLINE